THE EFFECT OF PREVENTIVE MAINTENANCE, TRAFFIC MANAGEMENT, TECHNOLOGY AND COMMUNICATION SUPPORT AND OPERATOR CARE ON OSH PERFORMANCE TRANSPORTATION OF TRUCK UNITS IN THE MINING SERVICE COMPANY PT. XYZ
DOI:
https://doi.org/10.52909/jemeb.v2i2.103Keywords:
Maintenance, Preventive Maintenance, Traffic Management, Technology and Communication Support, Operator Maintenance, OHS Transportation PerformanceAbstract
This study aims: To determine the direction and strength of the effect of preventive maintenance on the performance of K3 transportation at Mining Service Company PT. To determine the direction and strength of the influence of traffic management on the performance of K3 transportation at the PT. To determine the direction and strength of the influence of technology and communication on the performance of K3 transportation at the PT XYZ Mining Service Company. This research is descriptive quantitative. The population in this study were 2145 workers and staff working in the construction service company PT. The sampling technique in this study is the saturated sampling technique, the samples taken are 145 workers and staff who work in the construction service company PT. The results of this study indicate that: There is an effect of preventive maintenance on the performance of K3 transportation. There is an effect of traffic management on the performance of K3 transportation. There is an effect of technology and communication support on the performance of K3 transportation. There is an effect of operator concern on the performance of K3 transportation
References
Adzim, H. I. (2013). Pengertian dan Elemen Sistem Manajemen K3 (Keselamatan dan Kesehatan Kerja). Jakarta: Keselamatan dan Kesehatan Kerja.
Ahmadi, N., & Hidayah, N. Y. (2017). Analisis Pemeliharaan Mesin Blowmould Dengan Metode RCM Di PT. CCAI. Jurnal Optimasi Sistem Industri, 16(2), 167. https://doi.org/10.25077/josi.v16.n2.p167-176.2017 DOI: https://doi.org/10.25077/josi.v16.n2.p167-176.2017
Aka, K. A. (2017). Pemanfaatan Teknologi Informasi dan Komunikasi (TIK) Sebagai Wujud Inovasi Sumber Belajar di Sekolah Dasar. Jurnal Pendidikan dan Pembelajaran Sekolah Dasar, 1(2a), 28–37. https://doi.org/http://dx.doi.org/10.30651/else.v1i2a.1041 DOI: https://doi.org/10.24036/jippsd.v2i2.102699
Alen, Y., Agresa, F. L., & Yuliandra, Y. (2017). Analisis Kromatografi Lapis Tipis (KLT) dan Aktivitas Antihiperurisemia Ekstrak Rebung Schizostachyum brachycladum Kurz (Kurz) pada Mencit Putih Jantan. Jurnal Sains Farmasi & Klinis, 3(2), 146. https://doi.org/10.29208/jsfk.2017.3.2.141 DOI: https://doi.org/10.29208/jsfk.2017.3.2.141
Andrian, A. (2010). Handout: Perawatan dan Perbaikan Mesin. Yogyakarta: Universitas Negeri Yogyakarta.
Asmani, J. M. (2011). Tips Pemanfaatan Teknologi Informasi dan Komunikasi dalam Dunia Pendidikan. Yogyakarta: DIVA Press.
Bastos, G. S. (2013). Decision Making applied to Shift Change in Stochastic Open-pit Mining Truck Dispatching. IFAC Proceedings Volumes, 46(16), 34–39. https://doi.org/10.3182/20130825-4-US-2038.00090 DOI: https://doi.org/10.3182/20130825-4-US-2038.00090
Bau, Q. D., Ali, I., & Reski, N. T. A. (2020). Kinerja Manajemen Lalu Lintas Baru di Kawasan Losari Kota Makassar. Jurnal Transportasi, 20(1), 37–46. https://doi.org/10.26593/jtrans.v20i1.3854.37-46 DOI: https://doi.org/10.26593/jtrans.v20i1.3854.37-46
Bruke, S. (2011). Truck Driver Error: The Main Cause of Most Trucking Accidents. Burke Law, 2(10).
Cadas, I. C. (2021). Pengaruh Teknologi dan Komunikasi terhadap Kinerja Karyawan di Koperasi Simpan Pinjam Damai Kabupaten Lombok Utara. Skripsi: Universitas Muhammadiyah Mataram.
Dewi, N. P. T. D., & Purnawati, N. K. (2021). Peran Maintenance dalam Memoderasi Pengaruh TQM terhadap Kinerja Perusahaan Bounty Cruises di Pelabuhan Benoa. E-Jurnal Manajemen Universitas Udayana, 10(2), 125–144. https://doi.org/10.24843/EJMUNUD.2021.v10.i02.p02 DOI: https://doi.org/10.24843/EJMUNUD.2021.v10.i02.p02
Doloi, H., Iyer, K. C., & Sawhney, A. (2011). Structural equation model for assessing impacts of contractor’s performance on project success. International Journal of Project Management, 29(6), 687–695. https://doi.org/10.1016/j.ijproman.2010.05.007 DOI: https://doi.org/10.1016/j.ijproman.2010.05.007
Fiscor, S. (2007). Productivity considerations for shovels and excavators. The Engineering and Mining Journal.
Fithri, P. (2010). Prima (2010) melakukan penelitian terhadap mesin kompresor berdasarkan hasil analisis dan diskusi yang telah dilakukan, dengan melakukan preventive maintenance,. Skripsi. Universitas Indonesia.
Hariandja, M. T. E. (2007). Manajemen Sumber Daya Manusia: Pengadaan, Pengembangan, Pengkompensasian, dan Peningkatan Produktivitas Pegawai. Jakarta: Grasindo.
Jati, D. S. (2014). Pengelolaan Program Keselamatan Transportasi Jalan di Jalur Pantura Pekalongan. Jurnal Ilmu Politik, 4(1), 49–58. https://doi.org/https://doi.org/10.14710/politika.4.1.2013.49-58
Jono. (2015). Total Productive Maintenance (TPM) Pada Perawatan Masin Boiler Menggunakan Metode Overall Equipment Effctiveness Studi Kasus Pada PT. XY. Jurnal Ilmiah Teknik Industri dan Informasi, 3(2), 47–62.
Kirk-Othmer. (2000). Encyclopedia of Chemical Technology (17 ed.). Kanada: John Wiley and Sons, Inc.
Krause, N. (2006). Gratitude Toward God, Stress, and Health in Late Life. Research on Aging, 28(2), 163–183. https://doi.org/10.1177/0164027505284048 DOI: https://doi.org/10.1177/0164027505284048
Kusnadi, K., & Taryana, T. (2016). Usulan Waktu Penggantian Optimum Komponen Mesin Gas Engine (Prechamber Gas Valve) dengan Model Age-Based Replacement di PT.XYZ. Jurnal Teknologi, 8(1), 45. https://doi.org/10.24853/jurtek.8.1.45-52 DOI: https://doi.org/10.24853/jurtek.8.1.45-52
Mangkunegara, A. P. (2002). Sumber Daya Manusia Perusahaan. Bandung: Remaja Rosdakarya.
Manzini, S. (2010). Pemeliharaan Sistem Industri. London: Musim Semi.
Nachnul, A., & Imron, M. M. (2013). Sistem Perawatan Terpadu. Yogyakarta: Graha Ilmu.
Ngadiyono, Y. (2010). Pemeliharaan Mekanik Industri. Yogyakarta: Kementrian Pendidikan Nasional Universitas Negeri Yogyakarta.
Patnayak, S., Tannant, D. D., Parsons, I., Del Valle, V., & Wong, J. (2008). Operator and dipper tooth influence on electric shovel performance during oil sands mining. International Journal of Mining, Reclamation and Environment, 22(2), 120–145. https://doi.org/10.1080/17480930701482961 DOI: https://doi.org/10.1080/17480930701482961
Praharsi, Y., Sriwana, I. K., & Sari, D. M. (2015). Perancangan Penjadwalan Preventive Maintenance pada PT. Artha Prima Sukses Makmur. Jurnal Ilmiah Teknik Industri, 14(1), 59–65. https://doi.org/https://doi.org/10.23917/jiti.v14i1.624
Rusman, Kurniawan, D., & Riayana, C. (2011). Pembelajaran Berbasis Teknologi Informasi dan Komunikasi: Mengembangkan Profesionalisme Guru. Jakarta: Rajawali Pers.
Sari, D. P., & Ridho, M. F. (2016). Evaluasi Manajemen Perawatan dengan Metode Reliability Centered Maintanance (RCM) II pada Mesin Blowing I di Plant I PT. Pisma Putra Textile. J@ti Undip : Jurnal Teknik Industri, 11(2), 73–80. https://doi.org/10.14710/jati.11.2.73-80 DOI: https://doi.org/10.14710/jati.11.2.73-80
Setiawan, F. D. (2016). Perawatan Mekanikal Mesin Produksi. Yogyakarta: Maximus.
Smith, A. M., & Hinchcliffe, G. R. (2003). RCM: Gateway to World Class Maintenance. New York: Elsevier.
Subana, M., & Sudrajat. (2011). Dasar-Dasar Penelitian Ilmiah. Bandung: Pustaka Setia.
Varhelyi, A. (2016). Road Safety Management ‒ The Need for a Systematic Approach. The Open Transportation Journal, 10(1), 137–155. https://doi.org/10.2174/1874447801610010137 DOI: https://doi.org/10.2174/1874447801610010137
Widowati, E. (2017). Best practices dalam Manajemen Risiko di Perusahaan dan Institusi. Semarang: Cipta Prima Nusantara.
Zeng, W., Chen, J., Yang, H., Deng, L., Liao, G., & Xu, Z. (2017). Robust coating with superhydrophobic and self-cleaning properties in either air or oil based on natural zeolite. Surface and Coatings Technology, 309, 1045–1051. https://doi.org/10.1016/j.surfcoat.2016.10.036 DOI: https://doi.org/10.1016/j.surfcoat.2016.10.036
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Restu Harywibowo, Agustinus Hariadi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
